This is just a reservation indicating that you will pick up the item at TekBots (KEC 1110) within the next hour.
If you fail to pick up the item within the next hour your reservation will expire and other users will be able to reserve the item.
By hitting the 'Reserve' button below, you are agreeing to the following terms and conditions when renting out the equipment.
Terms & Conditions:
Responsibility and Use & Disclaimer Warrenties: You are responsible for the use of the rented
items. You assume all risks inherent to the operation and use of rented items, and agree to
assume the entire responsibility for the defense of, and to pay, indemnity and hold Above All
Party Rentals harmless from and hereby release Above All Party Rentals from, all claims for
damage to property or bodily injury (including death) resulting from the use, operation or
possession of the items, whether or not it be claimed or found that such damage or injury
resulted in whole or part from Above All Party Rentals negligence, from the defective condition
of the items, or any other cause. YOU AGREE THAT NO WARRANTIES EXPRESSED OR IMPLIED,
INCLUDING MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE HAVE BEEN MADE IN
CONNECTION WITH THE EQUIPMENT RENTED.
Equipment Failure: You agree to immediately discontinue the use of rented items should it at
any time become unsafe or in a state of disrepair, and will immediately (one hour or less) notify
Above All Party Rentals of the facts. Above All Party Rentals agrees at our discretion to make the
items operable in a reasonable time, or provide a like items if available, or make a like item
available at another time, or adjust rental charges, The provision does not relieve renter from
obligations of contract. In all events Above All Party Rentals shall not be responsible for injury or
damage resulting in failure or defect of rented item.
Equipment Responsibility: Renter is responsible for equipment from time of possession to time
of return. Renter assumes the entire risk of loss, regardless of cause. If items are lost, stolen,
damaged, renter will assume cost of replacemt or repair, including labor costs. Renter shall pay
a reasonable cleaning charge for rented items returned dirty.
Time of Return: Renter's right of possession terminates upon the expiration of rental period set
forth on the contract. Time is of the essence in this contract. Any extension must be agreed
upon in writing.
Late Returns: Renter shall return rented items to Above All Party Rentals during regular
business hours, promptly upon. or prior to expiration of rental period. If renter does not timely
return, the rental rate shall continue until items are returned.
Equipment Available to Borrow
OSU students, employees, and staff can borrow a variety of equipment from the TekBots store in KEC1110. Equipment is available on a varying number of day loans. To pick up equipment, browse the listing below and make a reservation for the equipment you want, A reservation is good for an hour so travel quickly to pickup your item from KEC1110. IN the event that you can not make it to our hours, it maybe possible to leave the item for you in one of our TekBox lockers. Contact us for more details.
Equipments For Rental
NVIDIA Jetson TX1
The world's first supercomputer on a module, Jetson TX1 is capable of delivering the performance and power efficiency needed for the latest visual computing applications. It's built around the revolutionary NVIDIA Maxwell™ architecture with 256 CUDA cores delivering over 1 TeraFLOPs of performance. 64-bit...
Wall Power Meter
TS-836A Plug Power Meter
URCERI Light Meter
The light meter covers a measuring range up to 200,000 Lux with highly accurate results. At twice per second frequency, light meter has a high response rate so you can be rest assured to get both fast and quality readings.
Occulus Rift VR
Oculus Rift, is a virtual reality headset developed by Oculus VR The device features per-eye displays running at 90 Hz with a higher combined resolution than DK2, 360-degree positional tracking, integrated audio, a vastly increased positional tracking volume, and a heavy focus on consumer ergonomics and aesthetics
HTC VIVE VR
Tektronix Oscilloscope TDS 2012 Kit
Tektronix TDS 2012 Two Channel Digital Storage Oscilloscope 100 Mhz 1 GS/s
Oscilloscope Probe - 100Mhz
Thrustmaster Driving Sim Racing Wheel
This equipment is the Thrustmaster racing wheel. It's compatible with windows and PlayStation 3 racing games. This controller has brake and gas peddles, two sequential levers, 11 action buttons, and a D-pad. The steering wheel has constant linear resistance to feel more realistic.
This jigsaw is corded and comes with only the blade on it.
This equipment is a small PC with Linux installed on it.
Turn your compatible Samsung Galaxy smartphone into a completely portable and wireless virtual reality machine, with Accelerometer, Gyrometer, Proximity (Mount/Unmount Detection).
SMD Rework / Soldering Station
This station is used for unsoldering and soldering components.
Digital Kitchen Scale
Digital scale with units of oz, lb:oz, fl oz, g, ml
Capacity: 5000g or 176 oz
Dimensions: 21cm x 16cm x 1.6cm
Solder Fume Extractor
Solder fume extractor
Next Unit of Computing (NUC) is a line of small-form-factor barebone computer kits designed by Intel. ... The barebone kits consist of the board, in a plastic case with a fan, an external power supply, and a VESA mounting plate
TDS210 2 channel Oscilloscope.
Alligator to C-Clips
Two alligator clips (one positive & one negative) with 3 feet of cable and power supply claws at the opposite end.
This is a vacuum chamber used often by the AIAA teams
Data Acquisition Kit
DATAQ Model DI-145
The DI-145 is a new product in a long line of low-cost starter kits from DATAQ Instruments. Suitable for measuring preamplified analog signals, the DI-145 in tandem with the included WinDaq software allows real time data acquisition, playback, and analysis performance equal to or better than other...
This 10Arms isolation transformer allows for 120VAC devices with non-isolatied power supplies plugged into it to be measured with normal oscilloscope probes.
Raspberry Pi 3B Kit + Camera
This kit includes all you need to get a Raspberry Pi 3B up and running for your project + a camera
HP Windows Mixed Reality VR
With integrated motion tracking, a 2–in–1 cable that pairs HDMI 2.0 and USB 3.0 together, and full software support, there's no additional software to download, no sensors to set up, and no frustrating hoops to jump through–just plug and play.
A622 Current Probe
The A622 from Tektronix is a 100A AC/DC current probe. This high value current probe is specifically designed to support measurements with Tektronix oscilloscopes. A622 long nose style clamp on probe uses hall effect current sensor to provide voltage output to oscilloscopes.
Logitech Driving Sim Racing Wheel
A simulator-grade racing wheel, the Logitech G27 Racing Wheel is designed to deliver the definitive sim racing experience for the PC and PLAYSTATION3. It features a powerful, dual-motor force feedback mechanism with exceptionally quiet helical gearing; a six-speed shifter with push-down reverse gear; integrated RPM/s...
Digital Hanging Scale
Digital Hanging Scale
Nvidia Jetson TX2
The NVIDIA® Jetson™ TX2 Developer Kit gives you a fast, easy way to develop software
and hardware for the Jetson TX2 AI supercomputer on a module. Jetson TX2 is ideal for
applications requiring high computational performance in a low power envelope.
A hot air rework station with attached soldering iron.
Hot Glue Gun
A hot glue gun
Flir IR Camera
The FLIR E4 thermal imaging camera is an easy-to-use troubleshooting tools for building, electrical, and mechanical applications. Find hidden problems, take accurate temperature readings, and confirm repairs were done correctly with the help of the 4,800 (80 x 60) pixel infrared resolution and FLIR Multi-Spectral Dyn...
Raspberry Pi 3B Kit
This kit includes all you need to get a Raspberry Pi 3B up and running for your project.
This digital microscope can connect to a PC over USB to save photos and videos. It will also display on bilt in LCD
Classic USB Gamepad
Aomekie Stereo Microscope model AO1001
Analog Discovery 2
USB oscilloscope, logic analyzer, and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds.
Etekcity Lasergrip 774
Practical for both indoor and outdoor use, the Lasergrip 774 lets you safely measure surface temperatures from a distance while still maintaining laser-sharp accuracy. Measure extreme temperatures ranging from -58°F (-50°C) to 716°F (380°C) without ever needing to come in contact. Use the i...
Twelve-Button USB 2.0 Game Controller for PC
Play games on your PC with a sixth-generation-style controller! This gamepad has a familiar and comfortable design, with full functionality. Left and Right analog sticks and L1/L2/R1/R2 buttons add to your game-playing enjoyment, along with a vibration feature. Just plug the gamepad into an available USB port and you...
Cen-tech Digital Photo Sensor
This tachometer allows you to take accurate RPM measurements without even touching the spinning object. Able to measure 6 to 99,999 RPM with ? 0.05% accuracy, the tachometer stores the last, minimum and maximum readings. The tachometer features a five-digit LCD display and c...
The meter is a handheld digital meter for measuring DC and AC Voltage, and DC and AC current.
Hantek 6022BE PC-Based USB Oscope
BNC to IC Test Hook
BNC to IC Test Hook
Arduino Grove Kit
Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your idea's.
P6616 Logic Probe
The P6616 is a general-purpose Logic Probe offers two eight-channel pods. Each channel ends with a probe tip featuring a recessed ground for simplified connection to the device under test. The coax on the first channel of each pod is colored blue making it easy to identify. The common ground uses an automotive-style ...
AVR JTAGICE3 Debugger
The Atmel JTAGICE3 is a powerful development tool for debugging and programming ARM Cortex-M based Atmel SAM and Atmel AVR microcrontrollers with On-Chip Debug capability.
• Programming and on-chip debugging of all Atmel AVR 32-bit Microcontrollers on both JTAG and aWire interfaces
• Programming and on-chip debu...
Playstation Eye (RGBd) Cameras (2pcs)
USB Cameras with depth mapping output. Useful for robotics applications.
Smart"i" Pi Touch
The SmartiPi Touch Pro is a case for the official Raspberry Pi 7" touchscreen display manufactured by the Raspberry Pi foundation and the Raspberry Pi B+,2B,3B,3A+,3B+, and 4. One power input in the back powers both the Raspberry Pi and the Official Pi display, creating a small all in one computer.
Sound Level Meter
Tenma 72-935 Compact Digital Sound Level Meter, Large 3/4" Digit LCD Backlit Display, Frequency Range 31.5Hz ~ 8KHz, Measuring Level Range 40.0 ~ 130.0dB, 1/2" Electret Condenser Microphone
Ultra compact sound level meter measures less than 6" in length, including the windscreen, and provides full 4...
The RSA306B offers full-featured spectrum analysis and deep signal analysis at a price unmatched by any previous offering. Using the latest in commercial interfaces and available computing power, the RSA306B separates signal acquisition from measurement, dramatically lowering the cost of instrument h...