eDNA Sampler Control Board V3
By
C++
Soldering
Arduino
Embedded Systems
PCB
Research
Open Source
Documentation
Hardware
This project aims to redesign the eDNA Sampler Control Board for the OPEnS Lab. Outside of a general redesign of the PCB Layout, 5V I2C Sensor support is being added as well as a complete redesign of the sleep/power management circuit. The problem with the current circuit is it does not allow for easy integration of external interrupts., which could be used to wake the system from a sleep/low power state.
0 Lifts 
Artifacts
Name | Description | |
---|---|---|
EAGLE EDA Files for the eDNA Control Board V3 | The EAGLE Schematic, Board, and Library files for the eDNA Control Board V3. | Download |
ECE 406 Final Status Report | A short document outlining the project's design and the final status of the project by the end of the Winter 2023 term. | Download |
eDNA Control Board V3 Documentation | A document explaining the function of each circuit and why certain design choices where made on the schematic and PCB level | Download |