For the final project for Engineering 103, I decided to collect data from my dorm room with a temperature sensor. For this project, I used the Arduino program, and I also used the ESP32. The temperature sensor that I used for this project was the LM75A. When I first started to write this code I was having a little trouble, but after doing some research I found some libraries to download that could help the code. After downloading those libraries, I successfully wrote this code and collected the data. But I was not able to meet all the requirements because I was having a little trouble getting my code to generate ten-minute averages. Although I could ask the code to generate some kind of average, which was the overall average when asked. As the data was being collected over the 24 hours, I ran into an issue where the data would fail because the temperature sensor was disconnecting. I would have to put it at a certain angle otherwise it would not work. The temperature was not hot throughout the 24 hours that I was taking my data, instead, it was pretty cool, also for this project I used Celius to measure the temperature.